Price:

All hardware included for easy DIY fitting for most 4WD's

This is an easy 'Bolt On' upgrade you can do at home

Everything you need to help you keep water out of your:

Front & Rear diffs & Transfer Case & Gearbox

For those hardcore creek crossings

Cool water causes air in diffs and gearboxes to contract, sucking in whatever is near the breather opening: Water-Mud-Dust-Nuclear Waste-Fish Guts-Wee etc...

Note: If your breather is blocked or too restrictive, the crud can be sucked through the axle seals-that's really bad!

This kit replaces standard poppet type breathers or plugs which are standard on most 4WD's with real air lines fitted with remote high flow filters

(Or upgrade your home made bodgy fuel filter type breathers if you have already gone that way!)

Note: Standard Breathers DO NOT have filters, they are just vents!

Stylish 4wd CNC Billet upgrade, Easy to fit.......

This kit has:

1 x CNC machined BILLET Manifold -  ANODISED BLUE
2 x 90 Degree Elbows for gearbox and transfer case
1 x Stainless Steel M6 Socket Head Cap Screw. Most 4WD's have a spare M6 nut in engine bay
8 x Push Fit Fittings- Corrosion resistant, threads treated with sealant, no thread tape required
4 x Filters- Funky blue industrial air filters, repel water, (watch out for sintered bronze filters which may allow dust and moisture in)
12m Length of industrial pnuematic tube
12 x Cable Ties