Price:

The Solid State Solenoid is designed to give current owners of  winches with Series Wound motors the most robust and reliable control pack possible

Only one solenoid is required to operate the winch and comes complete with a comprhensive wiring diagram

The module is sealed to resist any water and contaminants

It can be housed in your existing controller box, or we can supply housed in a small form housing at an additional cost

The solenoid pack is available in both 12 and 24 Volt

**Wireless Winch Controller compatible.

Solid State Solenoids are designed and built specifically for operating electrical winches and vehicle mounted cranes and are constructed to international standards for electrical products and includes the latest technology in switching solenoids.

A key feature of the Solenoid is the use of Silver Cadmium Oxide (AgCdO) coated contacts which resist arching when switching currents, this eliminates a common cause of failure among the common “style” solenoids, those older solenoids do not have this feature, without it they create carbon deposits on the contacts which eventually leads to the contacts welding themselves together forming a permanently closed circuit, leading to failure and potential damage to your winch.

Specifications:
Continuous Rating: 200A
Contact Arrangement: 2 PDT
Power Consumption 16 W
contact material Agcdo
Contact Rating (at Resistive Load ): 200A 48VDC, 200A 250Vac Max
Switching Voltage: 60vdc, 250 Vac
Over Carry The Electric Current ( 7ie/10s) 1400a/ 10s
Rated Coil Volt: 12vdc, 24vdc, 26vdc, 48vdc,60vdc
Operating Volt In Cold State At 20+/-5"C:(Vdc)
Pickup Max: 70% Rated Volt
Release: 5%-30% Rated Volt
Contact Resistance: Max. 50 Mq (Intial)
Insulation Resistance:Min. 100mq At 500vdc
Puncture (Volt) Strength: 1500vac 50 Hz/60 Hz (1 Minute)
Operate Time: Max. 50 Msec.
Release Time: Max. 50 Msec
Vibration Freq. At The Fixed Position: 3g, 1-50Hz (frep. 1- 10 Hz, Ampl. 25/F2 Frep.10-50HZ, Ampl.250/F2)
Electric Life: 50000 Cycles.
Mechanical Life: 100000 Cycles