Price:

The Autron combined Boost and EGT monitor has a dual sweep LCD display

The Boost range is 0 to 35 PSI is on the left Scale

The EGT range from 275 to 800 degree C is on the right scale

To maximise accuracy we have used K type thermocoupler EGT probe with industry standard connectors. This is provided with 1/8" BSP mounting bung

The Boost is measured using an MAP sensor provided in a small electronics box

We have added the feature on Customer configurable Alert levels to this product so it best suits all Diesel Vehicle types and customer requirements. This is done in the configuration setup whe you set up the back ground colour and alert colours

Now include the following additional features:

1. Peak hold on the EGT
2. Peak hold on the Boost
3. Customer Programmable EGT alert level (500C - 800C)
4. Customer programmable Alert on Temp Digital Display (configurable as either above or below the alert temp)
5. Relay output which can be configured so it will operate on any of the 3 scales, any 2 of the scales or on 1 scale only. This now can be used for winch protection (by fitting a relay in the wiring triggered by the gauge on temperature using the metal temp sensor) or into some of the tuning modules (Chip It) for over temp tuning variation

NOW with Optional Air Temperature Digital display

Optional Autron NTC Sensor kit and display your fridge temperature to avoid Hot Beer

**PICTURED WITH THE OPTIONAL TEMPERATURE PROBE FITTED - NOT SUPPLIED