Price:

The 9.5xp winch features an all new, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. A high gloss, chip resistant powder coat finish over chromate coated alloys affords superior corrosion resistance.

9.5XP SPECS/PART NUMBERS Part Number: PN 68500 (12V DC) Rated Line Pull: 9500 lbs. (4310 kgs.) single-line Motor: 12V 6 hp, High Output Parallel Series Wound Remote Control: Remote switch, 12' (3.7m) lead, S2 elements, integrated flashlight Geartrain: 3-Stage Planetary Gear Ratio: 156:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Wire Rope: 100', 5/16" diameter (30m, 8mm diam.) Fairlead: Roller Recommended Battery: 650 CCA minimum for winching Battery Leads: 2 gauge, 72" (1.83m) Finish: Chromate with high-gloss dark gray powder coat Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) Weight: 87 lbs. (39.5 kgs.)

12V DC PERFORMANCE SPECS Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current Pull by layer layer/Lbs(Kgs.) 0 38(11.6) 70 amps 1/9500(4313) 2000(910) 16.8(5.1) 175 amps 2/8650(4927) 4000(1818) 12.8(3.9) 262 amps 3/7920 (3595) 6000(2720) 10.1(3.1) 335 amps 4/7400(3359) 8000(3630) 8.8(2.7) 425 amps 5/6940(3150) 9500(4310) 7.6(2.3) 480 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H. (577mm L. x 160mm D. x 196 mm H)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Always use recovery equipment with caution

Improper use can cause severe injury